Basic Guide to Finding Hidden Valves and Piping
If you are a homeowner then you need to know the details of your home like the back of your hand. One of the things that is especially critical is finding hidden water as well as gas piping and valves and it is important to know where they are especially if you have to deal with things like an emergency. Below are some of the ways that you can be able to find out where the various valves are located.
If your home has natural gas then the shutoff valves will probably be located just before the gas meter outside the home. The nub is usually rectangular in shape and uses a wrench but for the most part gas companies usually do not recommend interfering with this valve. There is however a side valve that is usually located where the gas pipe first enters or much further down the line.
If you have a gas pipe then the valve will most likely be located in the utility room and will be made from flexible copper. If you find such a piping in your home then you are sure that you have a really high pressure gas system. Such gas systems usually have the shutoff valve near the water heater or the furnace.
When it comes to water meters, you will likely have two shutoff valves one before and the other after the meter as shown on this homepage. Should you be in an environment where it gets really cold then the shut off points is most likely to be located inside the home to prevent things like freezing. The shut off valve is most likely to be located in an underground box or lid next to exterior wall if you live in milder climates.
If you are finding it hard to find the valves then consider looking at property reports that you got at the last phase of the property purchase. It is important to look keenly at the report since it will show you where the valve is located. With the report, you are able to see the picture of the valves so that you are able to know how they look like so that you can shut them off.
If you have an automatic sprinkler system then you are going to find that it is hard to locate it since most of them are usually located underground. By using a metal detector, you are sure that you will be able to find such valves since they are usually made up of metals. It is easy for you to be able to know more info. about where to start when you have a plan even though it may not point out the exact location of the valve.